Audi AMB - Page 132

 With Valve 1 for camshaft adjustment N205
 Checking --> Camshaft timing control, checking
 Secure with retainer for chain tensioner 3366 before removing
 Removing and installing --> Camshafts and camshaft adjuster, removing and installing
 Sealing transition points between camshaft adjuster and cylinder head Sealing camshaft
adjuster/cylinder head transition (4 points)
20 - Rubber/metal gasket
 Apply sealant AMV 188 001 022 before installation
21 - Gasket
 Replace
22 - Exhaust valve
 With sodium filling
 Note instructions on scrapping valves with sodium filling Valve dimensions
 Do not rework, only lapping is permitted
 Valve dimensions Valve dimensions
 Checking valve guides --> Valve guides, checking
 Refacing valve seats --> Valve seats, refacing
23 - Intake valve
 Do not rework, only lapping is permitted
 Valve dimensions Valve dimensions
 Checking valve guides --> Valve guides, checking
 Refacing valve seats --> Valve seats, refacing
24 - Oil seal
 For intake camshaft
 Replacing --> Intake camshaft oil seal, replacing
25 - Camshaft position sensor rotor ring
 Note installed position: locate lug in notch on camshaft
26 - Washe
r
2005 Audi A4 Quattro
ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
1:01:03 AM Page 120
cardiagn.com