Audi AMB - Page 167

Courtes
y
of VOLKSWAGEN UNITED STATES, INC.
 Disconnect connector - arrow - at camshaft adjuster.
Fig. 229: Measuring Resistance Between Terminals Of Solenoid Valve
Courtesy of VOLKSWAGEN UNITED STATES, INC.
 Connect multimeter and measure resistance at valve.
 Specification: 10...18 ohms
If reading does not match specification:
 Replace valve.
If measured value matches specification:
 Check power supply.
Checking power supply
Requirements
 Fuse for camshaft adjustment valve OK --> Electrical Wiring Diagrams, Troubleshooting and Component
Locations
 Fuel pump rela
y
OK --> 24 - MULTIPORT FUEL INJECTION (MFI)
2005 Audi A4 Quattro
ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
1:01:07 AM Page 155
cardiagn.com