Audi Bluetooth adapter User Manual

Commissioning4
Commissioning
Checking the hardware and software status
of the MMI
– Select: Function key > Control key Settings >
Version.
The first four digits are relevant when checking (in the Fig. e.g.
46.3.0).
The MMI must be equipped with at least software version 42.2.0 (for
USA vehicles and all Audi A4/A5 from MY 2008 with a software
version 41.4.0). With lower software versions, the update for the
Audi music interface is not carried out. If your MMI displays a lower
software version, please contact your Audi dealer.
Note
The hardware and software status is checked when the Bluetooth
®
adapter is commissioned for the first time.
Updating the Audi music interface software
For the Bluetooth
®
adapter to be recognized by the Audi
music interface, a software update is required.
– Connect the supplied USB adapter cable to the Audi
music interface.
– Connect the USB stick. The update is started. Follow the
instructions on the MMI display.
Note
• Do not disconnect the USB stick during the update process.
• The software update is only carried out when the Bluetooth
®
adapter is commissioned for the first time or when a more recent
programme version is used.
Connecting the Bluetooth
®
adapter
– Press the function key .
– Connect the supplied USB adapter cable to the Audi
music interface.
– Connect the Bluetooth
®
adapter.
Fig. 2 Hardware and
software status
SETUP
A
1
Fig. 3 Carry out a soft-
ware update
MEDIA

Audi Bluetooth adapter Specifications

General

Brand	Audi
Model	Bluetooth adapter
Category	Car Stereo System
Language	English