EasyManua.ls Logo

Audibax Control 8 User Manual

Audibax Control 8
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
3
Control 8
Please read the manual before using the product
Por favor, lea el manual antes de usar el producto
USER´S
MANUAL
MANUAL
DE USUARIO
Control 8
PROGRAMMING / PROGRAMACIÓN
Power on the unit, it will be in MANUAL mode. Press PROGRAM 2 seconds. The corresponding
LED will flash. SCENE and CHASE will be ready to be programmed. / Encienda la unidad,
estará en modo MANUAL. Pulse PROGRAM 2 segundos. Parpadeará el led correspondiente.
SCENE y CHASE estarán listas para ser programadas.
To return to play mode, press PROGRAM once more. The led will then turn off. Para volver al
modo de reproducción, pulse PROGRAM una vez más. El led se apagará entonces.
AUTO/DEL
A. In playback mode (RUN) press Auto/Del, the led will turn on, indicating that the AUTO/RUN
mode is activated. / En modo reproducción (RUN) pulse Auto/Del, se encenderá el led,
indicando que el modo AUTO/RUN está activado.
B. Press this key to program SCENEs or CHASEs when in PROGRAM mode. / Pulse esta tecla
para programar SCENEs o CHASEs cuando esté en modo PROGRAM.
TAP SYNC /DISPLAY
A. In AUTO RUN mode, playback speed will be recorded by the last two button presses. / En
modo AUTO RUN, la velocidad de reproducción quedará registrada mediante las dos
últimas pulsaciones del botón.
B. In program mode, select on the screen between STEP and BANK. / En el modo programa,
selecciona en la pantalla entre STEP y BANK.
BLACKOUT
Press this button to disable all data output (no other functions) - Press it again to exit this
mode and send DMX data again. / Pulse este botón para desactivar todas las salidas de
datos (no otras funciones)- Vuelva a pulsarla para salir de este modo y enviar datos DMX de
nuevo.
DMX OUT
DMX512 data output / Salida de datos DMX512
DC INPUT
DC9V12V ,300 Ma ,MIN.
PROGRAMMING SCENES / PROGRAMANDO ESCENAS
Press PROGRAM 3 seconds. The corresponding led will flash, indicating that the unit is in
PROGRAM mode. / Pulse PROGRAM 3 segundos. Parpadeará el led correspondiente que
indica que la unidad está en modo PROGRAM
Press the SCANNER button (or buttons, if you want to program several devices at the same
time). Adjust the faders to your liking. / Pulse el botón SCANNER (o botones, si quiere
programar varios aparatos a la vez). Ajuste los faders a su gusto.
Press MIDI /ADD / Pulse MIDI /ADD.
Question and Answer IconNeed help?

Do you have a question about the Audibax Control 8 and is the answer not in the manual?

Audibax Control 8 Specifications

General IconGeneral
TypeDJ Controller
Number of Decks2
Channels2
MIDIYes
Power SupplyUSB
EQ3-band
InputsRCA
OutputsRCA
USBYes
USB TypeUSB-B
Software CompatibilitySerato DJ Intro
PowerUSB Powered
CompatibilityWindows and macOS
Audio InterfaceBuilt-in

Summary

Programming and Operation Modes

Manual and Program Mode Entry

Details on entering program mode and returning to play mode.

AUTO/RUN and Scene/Chase Programming

How to activate AUTO/RUN mode and program scenes or chases.

TAP SYNC and Display Functions

Adjusting playback speed and screen selection in program mode.

Output Control and Input Ports

BLACKOUT function, DMX OUT, and DC INPUT specifications.

Scene Programming

Scene Programming Steps

Steps for entering program mode, selecting scanners, adjusting faders, and saving scenes.

MIDI/ADD Button Functionality

Usage of the MIDI/ADD button for input or adding scenes.

Main Features and Specifications

Device Capabilities Overview

Details on DMX channels, banks, scenes, faders, and auto mode control.

Technical Specifications

Information on power requirements, output, dimensions, and weight.

Instructions for Use

General Description of Operations

Overview of DMX channels per scene and bank/scene looping.

Scene Programming and Playback

How to program and play scenes, including bank selection and auto execution.

Chase Programming and Execution

Information on available chases and their scene capacity.

SCENES / ESCENAS Functions

Manual Scene Control and Playback

Selecting banks and playing scenes using scene buttons.

AUTO RUN Mode and Fader Adjustments

Activating auto run mode and adjusting speed/fade time.

Bank Navigation and Page Selection

Using UP/DOWN buttons for banks and PAGE SELECTOR.