9
CLEANING YOUR DEVICE
Cleaning Your Device
Locate the Cleaning Brush from the accessory box. Remove the Ear Domes
from your Audien Atom Pro. Use the Cleaning Brush to remove wax, dirt or
any debris from both the Ear Dome and the device itself.
UV Sterilizaon
Plug in your USB Charing Cable and open the Charging Case. When the
charging case is connected to the cable, the UV light will power on for 5
minutes to disinfect the units, then it will automacally turn o.
Replacing The Wax Guard
A
A
B
B
Remove the Ear Domes.
Use the A end of the Wax Guard Replacement Tool to remove the old Wax Guard from
your Audien Atom Pro 2.
Flip the tool over, then use the B end of the Wax Guard Replacement Tool to install a new Wax
Guard in.
10
To Next Page
Loading...