Copyright © 2006 Audio Note (UK) Limited
Website
www.audionote.co.uk
E-Mail
info@audionote.co.uk
Telephone +44 (0) 1273 731498
Page 7
The top spikes are actually blunt so that they won't bite into
the speaker cabinets like sharp ones would.
The spike itself (item 1 opposite) should be screwed into
the top panels from the underside.
The spike can be adjusted using the provided allen key
(item 3).
Once at the required height, the lock nut (item 2) can be
tightened. It may help to hold the spike in place with the
allen key whilst doing so.
Once the above instructions have been applied to both speaker stands, the stands should be ready for use.
The stands should present a very solid foundation for your speakers. If they can be rocked from side to side, you may
need to re-adjust the bottom spikes to level them.
We wish you many years of happiness with this product.
To Previous Page
Loading...
