Audio Note AN-E - Technical Specifications

CHARACTERISTIC IMPEDANCE
6 Ohms
SENSITIVITY
(for 1 Watt at 1 Meter)
94dB Standard Efficiency models
97.5 to 98dB High Efficiency models
95 to 96 dB Alnico models
FREQUENCY RESPONSE
18Hz to 23Khz, +/- 6dB in room
MINIMUM AMPLIFIER POWER
7 Watts RMS per channel
MAXIMUM AMPLIFIER POWER
150 Watts (unclipped)
RMS per channel Peak
DRIVER
COMPLEMENT
8” foam surround bass driver, with paper or
Hemp cone, standard or Alnico magnet,
copper or silver voice coil
(model specific)
1” silk dome tweeter, standard or Alnico
magnet, copper or silver voice coil
(model specific)
UNIT WEIGHT
23 KG approximate
(per ‘speaker, internal crossover models)
SHIPPING WEIGHT
(ORIGINAL PACKAGING)
26 KG approximate
(per ‘speaker, internal crossover models)
UNIT DIMENSIONS
790mm (h) x 360mm (w) x 270mm (d)
(per loudspeaker, internal crossover
models)
SHIPPING DIMENSIONS
(ORIGINAL PACKAGING)
890mm (h) x 460mm (w) x 370mm (d)
(per loudspeaker, internal crossover
models)
NOTE
Due to Audio Note (UK)’s ongoing research
and development program, specifications
are subject to change without notice.
TECHNICAL SPECIFICATIONS