GALAXY 34 VACUUM TUBE STEREO INTEGRATED/POWER AMPLIFIER
Thank you for using AUDIO SPACE Galaxy Series vacuum tube stereo integrated
/power amplifier. Please read this instruction manual carefully before unpacking the
contents and using your amplifier.
SPECIFICATIONS
! Input impedance >89k ohm (RCA/Direct In)
! Output impedance 4, 8 ohm
! Output power 16W×2 (TRIODE-CLASS AB PUSH-PULL)
32W×2 (ULTRALINEAR-CLASS AB PUSH-PULL)
! Damping factor >5
! Frequency response 20Hz
∼
30kHz -1dB
! T.H.D. <1% 20Hz
∼
20kHz (REF. OUTPUT)
! Total gain 25dB
! Input sensitivity 300mV
∼
600mV
! S/N ratio >80dB (HUM NOISE<3mV)
! Channel balance <1dB 20Hz
∼
20kHz (MAX. VOLUME)
! Channel separation >60dB (1kHz
∼
3.3kHz)
! Vacuum tubes V1, V2, V3, V4: EL34×4
V5, V6: 6N8P (6SN7) ×2
V7, V8: 6N9P (6SL7) ×2
! Power requirement AC
∼
230V±5% 50
/
60Hz
! Dimension 330×400×190mm (D×W×H)
! Weight 22.5kg (N.W.) / 26.2kg (G.W.)
* Information and diagrams in this instruction are subject to change without notice.
【
WARNING
】
DO NOT OPEN THE CHASSIS OF THIS PRODUCT
* To reduce the risk of electric shock, do not remove the bottom cover of amplifier.
* Do not attempt to repair the product yourself.
* No user serviceable parts inside. Refer all service to qualified service personnel.
* Keep liquids away from the amplifier. If liquid is spilled into the unit, disconnect
the AC power cord from the unit at once and consult your authorized dealer.
To Next Page
Need help?
General
