Need help?Do you have a question about the Audio System X Series and is the answer not in the manual?
Overview of key features and capabilities of the X-500.1 MD amplifier.
Step-by-step guide for battery, ground, +12V, and remote connections.
Important safety and installation advice for amplifier mounting and wiring.
Connecting RCA cables or speaker outputs to amplifier inputs, switching Input Mode.
Using gain control and variable HPF/LPF for sound tuning.
Option to connect a remote control for convenient gain adjustment.
Explanation of BTL and SE switch positions for signal detection.
Connecting the amplifier for subwoofer output, including impedance.
Diagnosing problems with amplifier power, protection LEDs (blue/red), and overheating.
Resolving low volume, distorted sound, and high hiss or noise issues.
Verifying fuse integrity and checking all cable connections for errors.
General| Channels | 4 |
|---|---|
| RMS power at 4 Ohms | 75W x 4 |
| RMS power at 2 Ohms | 100W x 4 |
| RMS power bridged at 4 Ohms | 200W x 2 |
| THD | <0.05% |
| Signal to Noise Ratio | >90dB |
To Next Page
