Need help?Do you have a question about the Audio-Techica AT-LP140XP and is the answer not in the manual?
General| Drive Method | Direct Drive |
|---|---|
| Tonearm Effective Length | 230.5 mm |
| Overhang | 15 mm |
| Motor | DC Motor |
| Speeds | 33-1/3, 45 RPM |
| Platter | Aluminum |
| Braking System | Electronic |
| Wow and Flutter | 0.1% (WRMS) |
| Output Level | 2.5 mV |
| Phono Preamp Gain | 36 dB nominal |
| Power Supply | 100-240V AC, 50/60 Hz |
| Tonearm Type | S-shaped tonearm |
| Cartridge | AT-XP3 |
| Outputs | RCA |
| Tracking Error Angle | Less than 3 degrees |
| Pitch Control | +/-8% or +/-16% |
General warnings and cautions for safe operation of the product.
Specific safety advice and warnings tailored for users in the USA and Canada.
A numbered list of essential safety guidelines to follow during product use.
Guidance on proper placement and environmental conditions for the turntable body.
Instructions for correct handling, protection, and care of the cartridge and stylus.
Identification and description of components visible from the top of the turntable.
Identification and description of components located on the front and rear of the turntable.
Detailed explanation of the tonearm parts and their specific functions.
Instructions for correctly seating the turntable platter onto the spindle.
Guidelines for positioning the turntable on a stable surface for optimal performance.
Steps to ensure the turntable is perfectly level using adjustable feet.
Procedures for attaching the headshell and counterweight to the tonearm.
Procedure to balance the tonearm and set tracking force for proper sound reproduction.
Adjusting anti-skate force to counteract inward stylus pull during playback.
Instructions for handling the dust cover for protection and playback.
How to connect the turntable to audio systems using RCA cables and ground lines.
Final step to connect the turntable to a convenient AC power outlet.
Preparatory steps before placing a record on the turntable.
Step-by-step guide to start playing a record, including platter rotation and tonearm placement.
How to temporarily stop record playback by lifting the tonearm.
Procedures to safely stop the turntable rotation and record playback.
How to check and adjust playback speed using pitch controls and strobe dots.
Instructions for enabling the platter's reverse rotation function.
Cleaning and long-term storage instructions for the turntable body.
Guidance on cleaning the stylus tip for optimal performance and record longevity.
Step-by-step instructions to safely detach the stylus from the cartridge.
Instructions for mounting a new replacement stylus onto the cartridge.
Detailed steps for removing an old cartridge and installing a new one.
Technical details about the turntable's performance, motor, and speeds.
Technical details about the tonearm's design, length, and tracking capabilities.
Technical details for the included cartridge model, type, and headshell.
Overall specifications including power requirements, dimensions, weight, and accessories.
To Next Page
