Need help?Do you have a question about the Audio-Techica AT-LP3XBT and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Motor | DC Motor |
| Turntable Platter | Aluminum |
| Tonearm | Straight Tonearm |
| Bluetooth | Yes |
| Bluetooth Version | 5.0 |
| Bluetooth Codecs | SBC |
| USB Output | No |
| Type | Belt-drive |
| Speeds | 33 1/3, 45 RPM |
| Cartridge | AT-VM95E |
| Outputs | RCA/Bluetooth |
| Phono Preamp | Built-in |
| Power Supply | AC Adapter |
Guidelines for placement and environmental conditions for the turntable body.
Handling and protection instructions for the stylus and cartridge.
Identifies and describes the components visible from the top of the turntable.
Identifies and describes the components on the front of the turntable.
Identifies and describes the components on the rear of the turntable.
Identifies and describes the parts of the tonearm assembly, including balance and tracking controls.
Instructions for properly positioning the turntable and avoiding interference.
Steps for assembling the platter and felt mat onto the turntable spindle.
Procedure for rotating the platter to ensure smooth belt operation.
Steps for attaching the headshell and counterweight to the tonearm.
Explains the importance of tonearm balance and tracking force adjustment.
Detailed steps for balancing the tonearm.
Instructions for setting the correct tracking force for the stylus.
Guides on adjusting the anti-skate control to match tracking force.
Steps for attaching and using the turntable's dust cover.
Instructions for connecting to Bluetooth devices like headphones or speakers.
Instructions for connecting to active speakers or amplifiers using RCA cables.
Explains the concept and necessity of pairing Bluetooth devices.
Step-by-step instructions for pairing a Bluetooth device with the turntable.
Explains the meaning of different LED patterns for Bluetooth status.
Steps to perform before starting playback, including protector removal.
Steps for automatic playback using size and speed selectors.
Detailed steps for manual tonearm placement and playback.
Instructions for pausing playback by lifting the tonearm.
Steps to manually stop record playback and attach the protector.
How to set the pre-amplifier switch for different audio inputs.
Instructions for connecting directly to active speakers.
Wiring diagram for connecting to equipment with PHONO input.
Wiring diagram for connecting to equipment without PHONO input.
Steps to perform before playing a record, including AC adapter and protector.
Steps for automatic playback using size and speed selectors.
Detailed steps for manual tonearm placement and playback.
Instructions for pausing playback by lifting the tonearm.
Steps to manually stop record playback and attach the protector.
Instructions for cleaning the exterior of the turntable body.
Guidance on cleaning the stylus tip and handling records.
Steps for safely removing the stylus from the cartridge.
Steps for mounting a new stylus onto the cartridge and headshell.
Solutions for when the turntable platter fails to rotate.
Troubleshooting steps for audio output issues.
Solutions for common problems causing the stylus to skip.
Troubleshooting steps for howling or feedback noise.
Steps to resolve noise issues during record playback.
Solutions for incorrect playback speed issues.
Troubleshooting steps for inconsistent playback speed.
Solutions for humming noise, potentially related to grounding.
Steps to resolve issues when Bluetooth pairing fails.
Troubleshooting for no or low audio output when connected via Bluetooth.
Solutions for distorted sound, noise, or audio dropouts.
Details Bluetooth version, output, range, frequency, and codecs.
Lists specifications for motor, drive, speeds, platter, and noise levels.
Lists specifications for tonearm type, length, overhang, and tracking error.
Details specifications for the cartridge model, stylus, and headshell.
Covers power, consumption, dimensions, weight, and included accessories.
To Next Page
