AT-SP60BT User Guide
What’s in the box:
1xAT-SP60BT Bluetooth speaker
1xUser Manual
1xMicro USB Charging Cable
1x3.5mm AUX Cable
Buttons Definition:
1. Long press the power button: Power ON/OFF
2. - Short press：volume down，long press：the previous track
3. + Short press：volume up，long press：the next track
4. Play/Pause: short press it to Play/Pause; long press it to disconnect the current
Bluetooth pairing
5. Handsfree: short press it during a call to pick/hang up; long press it to reject calls.
Bluetooth Pairing：
1. Long Press the power button to Power ON, the Blue LED flashes quickly;
2. Turn on the Bluetooth switch on your Bluetooth devices;
3. Find AT-SP60BT，select it and pair, the Blue LED will stay ON.
Charging the Speaker:
This speaker is with built-in Lithium Battery. Fully charge it before use; Before
charging, make sure it’s power OFF in case of abnormal conditions.
1. Charge the speaker with DC 5V adapter or your PC or Power Bank;
2. The red LED flashes slowly, indicating charging status; Once fully charged, the
red LED stays ON.
To Next Page
Need help?
General
