Audio Technica AT2010 User Manual

Polar Pattern
Frequency Response
SPECIFICATIONS
†
ELEMENT Fixed-charge back plate permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 40-20,000 Hz
OPEN CIRCUIT SENSITIVITY –48 dB (3.9 mV) re 1V at 1 Pa*
IMPEDANCE 100 ohms
MAXIMUM INPUT 136 dB SPL, 1 kHz at 1% T.H.D.
SOUND LEVEL
DYNAMIC RANGE
(typical) 113 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO
1
71 dB, 1 kHz at 1 Pa*
PHANTOM POWER 48V DC, 2 mA typical
REQUIREMENTS
WEIGHT
(less accessories) 233 g (8.2 oz)
DIMENSIONS 179.1 mm (7.05") long,
50.8 mm (2.00") maximum body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8470 Quiet-Flex
™
stand clamp for
5
/
8
"- 27 threaded stands;
5
/
8
"-27 to
3
/
8
"-16 threaded adapter; soft protective pouch
†
In the interest of standards development, A.T.U.S. offers full details
on its test methods to other industry professionals on request.
* 1 Pascal = 10 dynes/cm
2
= 10 microbars = 94 dB SPL
1
Typical, A-weighted, using Audio Precision System One.
Specifications are subject to change without notice.
Audio -Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
(330) 686-2600 Fax: (330) 686-0719 E-mail: pro@atus.com www.audio-technica.com
Form No. 0342-2700-00
©2007 Audio-Technica U.S., Inc. Printed in U.S.A.
Frequency in Hertz
LEGEND
12" or more on axis
Frequency Response
Response in dB
8 kHz
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
AT 2 010
Cardioid Condenser Vocal Microphone
• Studio-quality sound on stage for crystal-clear
vocal performance
• Extended frequency response and superior
transient response for smooth, natural sonic
characteristics
• High SPL-handling and wide dynamic range provide
unmatched versatility
• Cardioid polar pattern reduces pickup of sounds
from the sides and rear, improving isolation of
desired sound source
• Multi-stage grille design offers excellent protection
against plosives and sibilance without compromising
high-frequency clarity
• Corrosion-resistant contacts from gold-plated
XLRM-type connector
• Rugged, all-metal construction for years of
trouble-free use
• Quiet-Flex
™
stand clamp provides silent, flexible
microphone positioning

Audio Technica AT2010 Specifications

General

Type	Stage/performance microphone
Diaphragm diameter	16 mm
Microphone frequency	40 - 20000 Hz
Microphone sensitivity	-48 dB
Microphone direction type	Cardioid
Device interface	mini XLR (3-pin)
Connectivity technology	Wired
Carrying case	Yes
Number of products included	1 pc(s)
Product color	Black
Power source	-

Weight and Dimensions

Height	179.1 mm
Diameter	50.8 mm
Microphone weight	233 g