To Next PageTo Next Page
Need help?Do you have a question about the Audio Technica AT2020USB-XP and is the answer not in the manual?
General| Headphone out | Yes |
|---|---|
| Device interface | 3.5 mm (1/8\ |
| USB connector type | USB Type-C |
| Connectivity technology | Wired |
| Type | PC microphone |
| Bit rate | 24 bit |
| Sample rate | 192 kHz |
| Volume control | Rotary |
| Microphone frequency | 20 - 20000 Hz |
| Microphone Total Harmonic Distortion (THD) | 1 % |
| Output impedance | 32 Ω |
| Cable length | 2 m |
| Control type | Buttons, Rotary |
| Product color | Black |
| Windows operating systems supported | Windows 10, Windows 11 |
| Cables included | USB Type-C to USB Type-A |
| Number of products included | 1 pc(s) |
| Power source | USB |
| Input voltage | 5 V |
Weight and Dimensions| Height | 142 mm |
|---|---|
| Diameter | 52 mm |
| Microphone weight | 375 g |
Identifies and describes the physical components and controls of the microphone.
Step-by-step guide to connect the microphone to a computer via USB.
Configuration steps for Windows 11 to ensure microphone functionality.
Adjusting microphone level and sample rate in Windows sound settings.
Configuration steps for Windows 10 to ensure microphone functionality.
Adjusting microphone level and sample rate in Windows 10 sound settings.
Configuration steps for macOS Ventura to ensure microphone functionality.
Adjusting sample rate and bit depth for the microphone on macOS.
Addresses common issues and provides solutions for microphone problems.
