16
Specifications
Headphones
Type Active noise-cancelling
Driver 40 mm
Sensitivity 96 dB/mW (When noise-cancellation used)
*1
95 dB/mW (When noise-cancellation not used)
*1
Frequency response 20 to 20,000 Hz
Impedance 32 ohms (unit impedance)
Microphone
Type Electret condenser
Polar pattern Omnidirectional
Sensitivity -36 dB (1 V/Pa, at 1 kHz)
Frequency response 50 to 4,000 Hz
Communication specifications
Communication system Bluetooth version 4.2
RF output 4.0 mW EIRP
Maximum communication range Line of sight - approx. 10 m (33’)
Frequency band 2.402 GHz to 2.480 GHz
Modulation method FHSS
Compatible Bluetooth profiles A2DP, AVRCP, HFP, HSP
Support codec SBC
Supported content protection method SCMS-T
Transmission band 20 to 20,000 Hz
Other
Power supply DC 3.7 V lithium polymer battery
Charging time Approx. 4 hours
*2
Operating time Continuous transmission time (music playback):
Max. approx. 20 hours (when Bluetooth and noise-cancellation used)
*2
Max. approx. 42 hours (when only noise-cancellation used)
*2
Weight Approx. 180 g (6.3 oz)
Operating temperature 5°C to 40°C (41°F to 104°F)
Accessories • USB charging cable (30 cm (12“), USB Type-A/Micro USB Type-B)
• Cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug, L-shaped)
Sold separately • Earpads
*1 In case of wired connection.
*2 The above figures depend on operating conditions.
For product improvement, the product is subject to modification without notice.
• The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is
under license. All other trademarks are property of their respective owners.
To Next Page
Loading...
