10
Using the product
Talking on the phone
• If your Bluetooth device supports telephone features, you can use the product to talk on the phone.
• When your Bluetooth device receives a phone call, the product's ringtone sounds.
• If a call is received while you are listening to music, music playback is paused. When you finish the call, music
playback resumes.*
When
Operation Function
Receiving a call
Press the power supply/control button. Answers the call.
Press and hold the power supply/control button
(for about 3 seconds).
Rejects the call.
Talking on the
phone
Press the power supply/control button. Ends the call.
Press the power supply/control button and the
volume button (+).
Each time you press these buttons at the same time, you
switch the call to your mobile phone or to the product.
Press a volume button (+ or -). Adjusts the volume (+ or -) of the call.
* Depending on your Bluetooth device, music playback may not resume.
• These phone call controls may not be available on some smartphones.
Auto power-off function
The product automatically turns off after 5 minutes of not being connected to a device that has its power turned on.
Reset function
If the product does not work or other malfunctions occur, refer to "Charging
the battery" (p. 6) for information on inserting the USB charging cable to
provide power, and then do a reset.
Disconnecting and then reconnecting the USB charging cable will reset the
product and should resolve any problem you are experiencing. If the problem
persists, please contact your local Audio-Technica dealer.
Resetting the product does not change any of your settings (pairing
information, volume setting, etc.).
To Next Page
Loading...
