Audio Technica ATR2500-USB User Manual

6
(Service Pack 2; other operating systems may vary slightly)
1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue
LED will illuminate, indicating the mic is receiving power. Your computer will automatically
recognize the USB device and install a driver.
2. In the lower right portion of your screen you may see a message that new hardware was found;
or you may see a driver software installation notice.
3. To select the ATR2500-USB as your default recording device, begin at your Start menu.
Select Control Panel.
Preliminary setup with Windows XP

Audio Technica ATR2500-USB Specifications

General

Microphone frequency	30 - 15000 Hz
Microphone input impedance	16 Ω
Connectivity technology	Wired
Cable length	1.8 m
Product color	Silver
Weight	366 g
USB powered	Yes
Operating voltage	5 V
Package depth	177.8 mm
Package height	254 mm
Package weight	731 g