AudioCodes Mediant 4000 User Manual

Mediant 4000 Enterprise Session Border Controller
Mediant 4000 Enterprise Session Border Controller
Mediant 4000 Enterprise Session Border Controller
8. Select the ‘Index’ radio buon corresponding to the OAMP + Media + Control applicaon type,
and then click Edit.
9. Congure a LAN network address so that it corresponds to your network IP addressing scheme:
• Interface Mode: IP addressing method (IPv4 or IPV6)
• IP Address: IP address of the network interface
• Prex Length: Classless inter-domain roung (CIDR) representaon style of a doed-
decimal subnet notaon (e.g., 16 is synonymous with subnet 255.255.0.0)
• Gateway: IP address of the Default Gateway
• VLAN ID: VLAN ID for this interface
• Interface Name: Arbitrary descripve string for this interface
• Primary / Secondary DNS Server IP Address: IP address of the primary and secondary
Domain Name Server (DNS), if required
• Underlying Interface: Physical Ethernet port group (Group Member) on which this network
interface operates
Note: If you are deploying two Mediant 4000 E-SBC devices for High Availability (HA), you also
need to add a Maintenance network for HA. For more informaon, refer to the User’s Manual.
10. Click Apply and then click Done to apply and validate your network sengs.
11. Reset the Mediant 4000 E-SBC with a burn to ash of your new IP address sengs. From the
Device Acons drop-down list on the toolbar, choose Reset, and then in the opened Maintenance
Acons page, click the Reset buon.
11. Disconnect the Mediant 4000 E-SBC from the computer and then connect the Mediant 4000 E-SBC
to the desired network.
Obtaining Documentaon and Soware
If you are a registered user, you can obtain this quick guide and other relevant documentaon and soware
les from AudioCodes Website at hp://www.audiocodes.com/downloads.
For access to all the relevant documentaon and soware les on the Website, ensure that you log in as a
registered user.
The table below lists the Mediant 4000 E-SBC related documentaon:
Document Descripon
Mediant 4000 E-SBC Hardware Installaon
Manual
Provides a physical descripon of the Mediant 4000 E-SBC,
including mounng and cabling.
Mediant 4000 E-SBC User’s Manual Provides full conguraon of the Mediant 4000 E-SBC.
Customer Support
Customer technical support and service are generally provided by AudioCodes’ Distributors, Partners, and
Resellers from whom the product was purchased.
For technical support for products purchased directly from AudioCodes, or for customers subscribed to
AudioCodes Customer Technical Support (ACTS), please contact support@audiocodes.com.
©2013 AudioCodes Ltd. All rights reserved. AudioCodes, AC, AudioCoded, Ardito, CTI2, CTI², CTI
Squared, HD VoIP, HD VoIP Sound Beer InTouch, IPmedia, Mediant, MediaPack, NetCoder,
Netrake, Nuera, Open Soluons Network, OSN, Streo, TrunkPack, VMAS, VoicePackezer,
VoIPerfect, VoIPerfectHD, What’s Inside Maers, Your Gateway To VoIP and 3GX are trademarks
or registered trademarks of AudioCodes Limited. All other products or trademarks are property of
their respecve owners. Product specicaons are subject to change without noce.
LTRT-41563
76
7. Open the IP Interfaces Table page (Conguraon tab > VoIP > Network > IP Interfaces Table):
Quick Guide
Mediant 4000
Enterprise Session Border Controller (E-SBC)

AudioCodes Mediant 4000 Specifications

General

Brand	AudioCodes
Model	Mediant 4000
Category	Controller
Language	English