Need help?Do you have a question about the AudioCodes Mediant 2600 and is the answer not in the manual?
General| Type | Session Border Controller (SBC) |
|---|---|
| Maximum Concurrent Sessions | 2000 |
| SIP Trunks | Up to 1000 |
| Form Factor | 1U |
| Network Interfaces | 2x 10/100/1000Base-T |
| Ports | 2x USB |
| Power Supply | AC Power Supply |
| Protocols Supported | SIP, RTP, SRTP |
| Voice Codecs | G.711, G.723, G.726, G.729, iLBC, OPUS |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C / -4°F to 158°F |
| Humidity | Up to 95% non-condensing |
Describes how to change the IP address of the OAMP on the VoIP-LAN interface using the Web or CLI.
Details the embedded Web server for fault management, configuration, accounting, performance, and security.
Provides an overview of the CLI-based management and configuration.
Configures X.509 certificates for secure management, SIP transactions, and other security applications.
Details network-related configurations including Ethernet ports, IP interfaces, and routing.
Describes VoIP security-related configurations like firewall and intrusion detection.
Covers media-related configurations including voice settings, fax/modem capabilities, and RTP/RTCP settings.
Describes the configuration of the SBC application.
Describes configuration specific to the CRP application.
Describes the configuration of the HA system.
Details various maintenance procedures for the High Availability mode.
Allows performing device reset, lock/unlock, and saving configuration.
Describes various software update procedures, including loading auxiliary files.
Explains automatic device provisioning using HTTP/S.
To Next Page
