User's Manual 636 Document #: LTRT-42060
Mediant 2600 E-SBC
Parameter Description
LdapConfiguration_ConnectionStatus;
[ \LdapConfiguration ]
For a detailed description of this table, see 'Configuring LDAP
Servers' on page 201.
LDAP Server Search DN Table
Web: LDAP Search DN
Table
CLI: configure voip > ldap >
ldap-servers-search-dns
[LdapServersSearchDNs]
Defines the full base path (i.e., distinguished name / DN) to the
objects in the AD where the query is done, per LDAP server.
[ LdapServersSearchDNs ]
FORMAT LdapServersSearchDNs_Index =
LdapServersSearchDNs_Base_Path,
LdapServersSearchDNs_LdapConfigurationIndex,
LdapServersSearchDNs_SearchDnInternalIndex;
[ \LdapServersSearchDNs ]
For a detailed description of this table, see 'Configuring LDAP DNs
(Base Paths) per LDAP Server' on page 204.
Management LDAP Groups Table
Web: Management LDAP
Groups Table
CLI: configure voip > ldap >
mgmt-ldap-groups
[MgmntLDAPGroups]
Defines the users group attribute in the AD and corresponding
management access level.
[ MgmntLDAPGroups ]
FORMAT MgmntLDAPGroups_Index =
MgmntLDAPGroups_LdapConfigurationIndex,
MgmntLDAPGroups_GroupIndex, MgmntLDAPGroups_Level,
MgmntLDAPGroups_Group;
[ \MgmntLDAPGroups ]
For a detailed description of this table, see 'Configuring Access
Level per Management Groups Attributes' on page 206.
43.12.3 Least Cost Routing Parameters
The Least Cost Routing (LCR) parameters are described in the table below.
Table 43-40: LCR Parameters
Parameter Description
Web: Routing Rule Groups
Table
CLI: configure voip >
services least-cost-routing
routing-rule-groups
[RoutingRuleGroups]
This table parameter enables the LCR feature and configures the
average call duration and default call cost. The default call cost
determines whether routing rules that are not configured with a Cost
Group are considered as a higher or lower cost route compared to
other matching routing rules that are assigned Cost Groups.
[ RoutingRuleGroups ]
FORMAT RoutingRuleGroups_Index =
RoutingRuleGroups_LCREnable,
RoutingRuleGroups_LCRAverageCallLength,
RoutingRuleGroups_LCRDefaultCost;
[ \RoutingRuleGroups ]
Note: For a detailed description of this table, see ''Enabling LCR and
Configuring Default LCR'' on page 224.
Web: Cost Group Table
EMS: Cost Group
Provisioning > Cost Group
This table parameter configures the Cost Groups for LCR, where each
Cost Group is configured with a name, fixed call connection charge,
and a call rate (charge per minute).
To Next Page
Loading...
Need help?
General
