AudioCodes Mediant 2600 - Interworking Call Hold

User's Manual 344 Document #: LTRT-42060
Mediant 2600 E-SBC
20.8.11 Interworking Call Hold
The device supports the interworking of call hold / retrieve requests between IP entities
supporting different call hold capabilities:
 Interworking SDP call hold formats. This is configured by the IP Profile parameter,
'SBC Remote Hold Format'.
 Interworking the play of the held tone for IP entities that cannot play held tones locally.
This is configured by the IP Profile parameter, 'SBC Play Held Tone'.
 Interworking generation of held tone where the device generates the tone to the held
party instead of the call hold initiator. This is configured by the IP Profile parameter,
'SBC Reliable Held Tone Source'.
For configuring IP Profiles, see ''Configuring IP Profiles'' on page 297.