AudioCodes Mediant 2600 - Control Network Parameters; IP Group, Proxy, Registration and Authentication Parameters

Version 6.8 579 Mediant 2600 E-SBC
User's Manual 43. Configuration Parameters Reference
43.6 Control Network Parameters
43.6.1 IP Group, Proxy, Registration and Authentication Parameters
The proxy server, registration and authentication SIP parameters are described in the table
below.
Table 43-29: Proxy, Registration and Authentication SIP Parameters
Parameter Description
IP Group Table
Web: IP Group Table
EMS: Endpoints > IP Group
CLI: configure voip > voip-network
ip-group
[IPGroup]
This table configures IP Groups.
The ini file format of this parameter is as follows:
[ IPGroup ]
FORMAT IPGroup_Index = IPGroup_Type,
IPGroup_Description, IPGroup_ProxySetId,
IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_RoutingMode,
IPGroup_SRD, IPGroup_MediaRealm,
IPGroup_ClassifyByProxySet, IPGroup_ProfileId,
IPGroup_MaxNumOfRegUsers, IPGroup_InboundManSet,
IPGroup_OutboundManSet, IPGroup_RegistrationMode,
IPGroup_AuthenticationMode, IPGroup_MethodList,
IPGroup_EnableSBCClientForking, IPGroup_SourceUriInput,
IPGroup_DestUriInput, IPGroup_ContactName,
IPGroup_Username, IPGroup_Password,
IPGroup_UUIFormat, IPGroup_QOEProfile,
IPGroup_BWProfile, IPGroup_MediaEnhancementProfile,
IPGroup_AlwaysUseSourceAddr;
[/IPGroup]
For a description of this table, see ''Configuring IP Groups'' on
page 260.
Note: For this parameter to take effect, a device reset is
required.
Account Table
Web: Account Table
EMS: SIP Endpoints > Account
CLI: configure voip > sip-definition
account
[Account]
This table parameter configures the Account table for
registering and/or authenticating (digest) IP Groups (e.g., an
IP-PBX) to another IP Group (e.g., an Internet Telephony
Service Provider - ITSP).
The format of the ini file table parameter is as follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password, Account_HostName,
Account_Register, Account_ContactUser,
Account_ApplicationType;
[\Account]
For a detailed description of this table, see ''Configuring
Registration Accounts'' on page 277.