AudioCodes Mediant 2600 - 45 Technical Specifications

Version 6.8 643 Mediant 2600 E-SBC
User's Manual 45. Technical Specifications
45 Technical Specifications
The device's technical specifications are listed in the table below.
Notes:
• All specifications in this document are subject to change without prior notice.
• The compliance and regulatory information can be downloaded from AudioCodes
Web site at http://www.audiocodes.com/library.
Table 45-1: Technical Specifications
Function Specification
Networking Interfaces
LAN
 Eight 1000Base-T (Gigabit Ethernet) LAN port interfaces
operating in pairs (i.e., 4 port pairs) for 1+1 redundancy (where
one port is active and the other standby).
 Physical port separation by selecting port group per network
interface.
High Availability (HA)
Full HA
Two deployed devices for 1+1 high availability, communicating
through a Maintenance network interface. Upon failure of the active
device, all functionality is switched over to the redundant device.
Media Processing
IP Transport
VoIP (RTP/RTCP) per IETF RFC 3550 and 3551, IPv6
Control and Management
Control Protocols
 SIP-TCP, UDP, TLS and MSCML
 Cloud Resilience Package (CRP) and Standalone Survivability
(SAS) for service continuity
Operations & Management
 Embedded HTTP Web Server, Telnet, SNMP V2/V3
 Remote configuration and software download via TFTP, HTTP,
HTTPS, DHCP
 RADIUS, Syslog (for events, alarms and CDRs)
IP/VoIP Quality of Service
 IEEE 802.1p, TOS, DiffServ
 IEEE 802.1Q VLAN tagging
 Shaping, Policing, Queuing, Bandwidth Reservation
 RTCP XR Report Publish (RFC 3611)
Session Border Controller
 SIP Header conversion: IP to IP Routing translations of SIP,
UDP, TCP, TLS.
 Translation of RTP, SRTP; Support SIP trunk with multi-ITSP
(Registrations to ITSPs is invoked independently); Topology
hiding; Call Admission Control; Call Black/White list.
 Intrusion detection/prevention (NIDS); Anti SPIT & SPAM
mechanisms.