AudioCodes Mediant 2600 - Fax and Modem Capabilities

User's Manual 156 Document #: LTRT-42060
Mediant 2600 E-SBC
14.2 Fax and Modem Capabilities
This section describes the device's fax and modem capabilities and corresponding
configuration. The fax and modem configuration is done in the Fax/Modem/CID Settings
page.
Notes:
• Unless otherwise specified, the configuration parameters mentioned in this section
are available on this page.
• Some SIP parameters override these fax and modem parameters. For example,
the IsFaxUsed parameter and V.152 parameters in Section ''V.152 Support'' on
page 166.
• For a detailed description of the parameters appearing on this page, see
''Configuration Parameters Reference'' on page 533.
 To access the fax and modem parameters:
1. Open the Fax/Modem/CID Settings page (Configuration tab > VoIP menu > Media >
Fax/Modem/CID Settings).
Figure 14-2: Fax/Modem/CID Settings Page
2. Configure the parameters, as required.
3. Click Submit.