User's Manual 426 Document #: LTRT-42060
Mediant 2600 E-SBC
28.2 Resetting the Redundant Unit
You can reset the Redundant device, if necessary.
Note: When resetting the Redundant device, the HA mode becomes temporarily
unavailable.
To reset the Redundant device:
1. Open the High Availability Maintenance page:
• Navigation menu tree: Maintenance tab > Maintenance menu > High
Availability Maintenance
• Toolbar: Click the Device Actions button, and then choose Reset Redundant
Figure 28-2: High Availability Maintenance Page
2. Under the 'Redundant Options' group, click Reset; a confirmation box appears
requesting you to confirm.
3. Click OK.
To Next Page
Loading...
