Version 6.8 75 Mediant 2600 E-SBC
User's Manual 8. SNMP-Based Management
8.3 Configuring SNMP Trusted Managers
The SNMP Trusted Managers table lets you configure up to five SNMP Trusted Managers
based on IP addresses. By default, the SNMP agent accepts SNMP Get and Set requests
from any IP address as long as the correct community string is used in the request.
Security can be enhanced by using Trusted Managers, which is an IP address from which
the SNMP agent accepts and processes SNMP requests.
The following procedure describes how to configure SNMP trusted managers in the Web
interface. You can also configure this using the table ini file parameter,
SNMPTrustedMgr_x or CLI command, configure system > snmp > trusted-managers.
To configure SNMP Trusted Managers:
1. Open the SNMP Trusted Managers page (Configuration tab > System menu >
Management > SNMP > SNMP Trusted Managers).
Figure 8-2: SNMP Trusted Managers
2. Select the check box corresponding to the SNMP Trusted Manager that you want to
enable and for whom you want to define an IP address.
3. Define an IP address in dotted-decimal notation.
4. Click Submit, and then save ("burn") your settings to flash memory.
To Next Page
Loading...
