AudioCodes Mediant 2600 User Manual

Version 6.8 43 Mediant 2600 E-SBC
User's Manual 6. Web-Based Management
6.1.6.3 Modifying and Saving Parameters
When you modify a parameter value on a page, the Edit icon appears to the right of the
parameter. This indicates that the parameter has been modified, but has yet to be applied
(submitted). After you click Submit the icon disappears.
Figure 6-8: Edit Symbol after Modifying Parameter Value
 To save configuration changes on a page to the device's volatile memory
(RAM):

On the toolbar, click the Submit button.

At the bottom of the page, click the Submit button.
When you click Submit, modifications to parameters with on-the-fly capabilities are
immediately applied to the device and take effect. Parameters displayed on the page with
the lightning icon take effect only after a device reset. For resetting the device, see
''Resetting the Device'' on page 421.
Note: Parameters saved to the volatile memory (by clicking Submit), revert to their
previous settings after a hardware or software reset, or if the device is powered down.
Thus, to ensure parameter changes (whether on-the-fly or not) are retained, save
('burn') them to the device's non-volatile memory, i.e., flash (see ''Saving
Configuration'' on page 424).

AudioCodes Mediant 2600 Specifications

General

Brand	AudioCodes
Model	Mediant 2600
Category	Controller
Language	English