AudioCodes Mediant 2600 - Enabling SIP-Based Media Recording; Configuring SIP Recording Routing Rules

User's Manual 190 Document #: LTRT-42060
Mediant 2600 E-SBC
<group-ref>00000000-0000-0000-0000-00003a36c4e3</group-ref>
<start-time>2010-01-24T01:11:57Z</start-time>
<ac:AvayaUCID
xmlns="urn:ietf:params:xml:ns:Avaya">FA080030C4E34B5B9E59</ac:Avay
aUCID>
</session>
<participant id="1056" session="0000-0000-0000-0000-
00000000d0d71a52">
<nameID aor="1056@192.168.241.20"></nameID>
<associate-time>2010-01-24T01:11:57Z</associate-time>
<send>00000000-0000-0000-0000-1CF23A36C4E3</send>
<recv>00000000-0000-0000-0000-BF583A36C4E3</recv>
</participant>
<participant id="182052092" session="0000-0000-0000-0000-
00000000d0d71a52">
<nameID aor="182052092@voicelab.local"></nameID>
<associate-time>2010-01-24T01:11:57Z</associate-time>
<recv>00000000-0000-0000-0000-1CF23A36C4E3</recv>
<send>00000000-0000-0000-0000-BF583A36C4E3</send>
</participant>
<stream id="00000000-0000-0000-0000-1CF23A36C4E3" session="0000-
0000-0000-0000-00000000d0d71a52">
<label>1</label>
</stream>
<stream id="00000000-0000-0000-0000-BF583A36C4E3" session="0000-
0000-0000-0000-00000000d0d71a52">
<label>2</label>
</stream>
</recording>
--boundary_ac1fffff85b—
15.2.1 Enabling SIP-based Media Recording
The following procedure describes how to enable the SIP-based media Recording feature.
Once you have enabled this feature, your SIP Recording Routing rules (configured in
''Configuring SIP Recording Routing Rules'' on page 190) become active.
 To enable SIP-based media recording:
1. Open the SIP Recording page (Configuration tab > VoIP menu > Services > SIP
Recording).
2. From the 'SIP Recording Application' drop-down list, select Enable.
3. Click Submit, and then reset the device with a burn-to-flash for your settings to take
effect.
15.2.2 Configuring SIP Recording Routing Rules
The SIP Recording Routing table lets you configure up to 30 SIP-based media recording
rules. A SIP Recording Routing rule defines calls that you want to record. For an overview
of this feature, see ''SIP-based Media Recording'' on page 187.
The following procedure describes how to configure SIP Recording Routing rules in the
Web interface. You can also configure SIP Recording Routing rules using the table ini file
parameter, SIPRecRouting or CLI command, configure voip/services sip-recording sip-rec-
routing.