AudioCodes Mediant 2600 User Manual

Version 6.8 427 Mediant 2600 E-SBC
User's Manual 29. Disconnecting Active Calls
29 Disconnecting Active Calls
You can forcibly disconnect all active (established) calls or disconnect specific calls based
on their Session ID. This is done in the CLI using the following commands (from basic
command mode):

Disconnects all active calls:
# clear voip calls

Disconnects active calls belonging to a specified Session ID:
# clear voip calls <Session ID>

AudioCodes Mediant 2600 Specifications

General

Brand	AudioCodes
Model	Mediant 2600
Category	Controller
Language	English