AudioCodes Mediant 2600 - 33 Saving Current Configuration to a File and Sending it to Remote Destination

Version 6.8 469 Mediant 2600 E-SBC
User's Manual 33. Saving Current Configuration to a File and Sending it to Remote Destination
33 Saving Current Configuration to a File and
Sending it to Remote Destination
You can save (create) the current configuration as a configuration file on the device's flash
memory and then have it sent it to a user-defined URL of a remote server (TFTP or
HTTP/S). The configuration settings in the file are based only on CLI commands. This is
done through CLI:

Creating a Configuration file and saving it on a remote server:
# write-and-backup to <URL path with file name>
For example:
# write-and-backup to tftp://192.168.0.3/config-device1.txt