User's Manual 474 Document #: LTRT-42060
Mediant 2600 E-SBC
34.2 Viewing Ethernet Port Information
The Ethernet Port Information page displays read-only information about the Ethernet Port
Group connections.
To view Ethernet port information:
Open the Ethernet Port Information page:
• Navigation menu tree: Status & Diagnostics tab > System Status menu >
Ethernet Port Info
• On the Home page, click any Ethernet port on the graphical display of the device
(see ''Viewing the Home Page'' on page 49)
Table 34-1: Ethernet Port Information Parameters
Parameter Description
Active Displays whether the port is active ("Yes") or not ("No").
Speed Displays the speed (in Mbps) of the Ethernet port.
Duplex Mode Displays whether the port is half- or full-duplex.
State Displays the state of the port:
"Forwarding": Active port (data is being received and sent)
"Disabled": Redundancy port
Group Member Displays the port-pair group ID to which the port belongs.
To Next Page
Loading...
