AudioCodes Mediant 2600 - Page 578

User's Manual 578 Document #: LTRT-42060
Mediant 2600 E-SBC
Parameter Description
Bandwidth Profile Table
Web: Bandwidth Profile
CLI: configure voip/qoe bw-
profile
[BWProfile]
This table parameter defines Bandwidth Profiles.
The format of the ini file table parameter is as follows:
[BWProfile]
FORMAT BWProfile_Index = BWProfile_Name,
BWProfile_EgressAudioBandwidth,
BWProfile_IngressAudioBandwidth,
BWProfile_EgressVideoBandwidth,
BWProfile_IngressVideoBandwidth,
BWProfile_TotalEgressBandwidth,
BWProfile_TotalIngressBandwidth, BWProfile_WarningThreshold,
BWProfile_hysteresis, BWProfile_GenerateAlarms;
[\BWProfile]
For a detailed description of this table, see ''Configuring Bandwidth
Profiles'' on page 241.
Note: For this parameter to take effect, a device reset is required.
Media Enhancement Profile Table
Web: Media Enhancement
Profile
CLI: configure voip/qoe
media-enhancement
[MediaEnhancementProfile]
This table parameter defines Media Enhancement Profiles.
The format of the ini file table parameter is as follows:
[MediaEnhancementProfile]
FORMAT MediaEnhancementProfile_Index =
MediaEnhancementProfile_ProfileName;
[\MediaEnhancementProfile]
For a detailed description of this table, see ''Configuring Media
Enhancement Profiles'' on page 244.
Media Enhancement Rules Table
Web: Media Enhancement
Rules
CLI: configure voip/qoe
media-enhancement-rules
[MediaEnhancementRules]
This table parameter defines Media Enhancement Rules.
The format of the ini file table parameter is as follows:
[MediaEnhancementRules]
FORMAT MediaEnhancementRules_Index =
MediaEnhancementRules_MediaEnhancementProfile,
MediaEnhancementRules_RuleIndex,
MediaEnhancementRules_Trigger, MediaEnhancementRules_Color,
MediaEnhancementRules_ActionRule,
MediaEnhancementRules_ActionValue;
[\MediaEnhancementRules]
For a detailed description of this table, see ''Configuring Media
Enhancement Profiles'' on page 244.