AudioCodes RXV81 - Page 3

P a g e | 3
Mounting RXV81 on display:
The RXV81 can be mounted on top of the display using a camera clip bracket (purchased separately).
1. Attach the camera clip
bracket to the bottom of
RXV81, using the D-Ring
Hinged screw (supplied).
2. Open the camera clip bracket
and place it on top of the
display. Make sure that it's
firmly attached.
To avoid any accidents, if you need to move the display, always remove RXV81 first to prevent
it from falling off the display. In addition, refrain from pushing RXV81 from the back to the
front as it may dislodge. Please make sure proper precautions are taken to maintain safety.