Need help?Do you have a question about the AudioControl DM-608 and is the answer not in the manual?
Illustrates how to connect the power supply to the DM-608/DM-810 unit, including head unit and fuse details.
Shows a system diagram connecting a factory radio's speaker-level outputs to the DM-608/DM-810.
Depicts a system setup using line-level inputs from an aftermarket head unit to the DM-608/DM-810.
Illustrates a multi-channel system using speaker-level inputs with an LC6i line-out converter.
General| Inputs | 6 |
|---|---|
| Outputs | 8 |
| Signal-to-Noise Ratio (SNR) | > 100 dB |
| Frequency Response | 20 Hz - 20 kHz |
| Maximum Input Voltage | 10 V |
| Input Impedance | 10 kΩ |
| Dimensions | 19" x 1.75" x 8.5" |
| Input Connectors | XLR |
| Output Connectors | XLR |
To Next Page
