AudioControl EQS User Manual

Instructs the user to install the EQS in the signal path between the source unit and amplifier(s); advises seeking dealer help if unsure.

Details connecting the +12 volt power, ground, and remote turn-on wires, emphasizing the importance of reading further for details.

Explains the need to level match EQS inputs to the source and outputs to amplifier inputs for optimal performance.

Guides on selecting a signal path location before amplifiers and mounting the unit securely, avoiding hazards like gas tanks or wiring.

Provides instructions for connecting the +12V power, ground, and remote turn-on wires, with warnings about battery disconnection.

Presents various system configuration diagrams showing how to wire the EQS with different source units and crossovers.

Adjust input gain controls to make the 'Overload' LED flicker with music for each input type.

Adjust output level controls until '2 volt' or '5 volt' light flickers to match amplifier input gain levels.

Set amplifier input gains to minimum as a critical step in the level matching process.

Use a test CD with pink noise and an RTA for optimum equalization, or consult an authorized dealer.

Start equalization by cutting peaks and boosting insufficient ranges, prioritizing cuts over boosts.

Check power wire, remote turn-on, and fuses if the EQS power LED does not turn on.

Check level matching, amplifier gains, and EQ boost levels; suggest PFM filter adjustment for distortion.

Lists conditions: fill out card within 15 days, keep sales receipt, and purchase from authorized dealer.

States that unauthorized repairs or tampering with the serial number voids the warranty.

Lists conditions that void warranty: altered serial number, improper use (damage, wrong connections, abuse).

Reiterates the five-year warranty for dealer installations versus a one-year warranty for self-installations.