- 5 -
①
②
③
④
⑤
⑥ ⑦
1 Volt: This light will tell you when the signal level is at 1 volt. Most
head units will give you enough juice to light this one. You’ll most likely
want at least the 1 volt light to icker, more if the rest of your compo-
nents can handle it. Any AudioControl component that you connect after
the OVERDRIVE PLUS won’t mind the 8 volt RMS light ickering. Go
ahead. Light it up!
6) Remote Level Control (sold separately): The port allows you to
plug an optional dash mounted remote level control. Now you can have a
separate system volume control or if the OVERDRIVE PLUS is driving
just your bass amp, you can have a separate bass control for the system.
To Next Page
Loading...