To Next PageTo Next Page
Need help?Do you have a question about the AudioControl The Epicenter Micro and is the answer not in the manual?
Inputs| maximum input line level (RCA) | 15 Vrms |
|---|---|
| maximum input speaker level | 40 V/400 W (20K Ω setting) |
| input impedance line level | 7 kΩ |
Outputs| preamp outputs | 1 pair |
|---|---|
| max output level | 13 V Peak |
| output impedance | 150 Ω |
Performance| THD | 0.03% |
|---|---|
| frequency response | 10 Hz to 22 kHz, +/- 1 dB |
| signal to noise ratio | >105 dB |
General| weight | 0.6 lbs |
|---|---|
| dimensions | 5.12” W x 3” D x 1” H |
| current draw | 300 mA |
Core bass maximization circuit that recreates and injects low frequency information.
Includes a dual control knob for remote level and effect adjustments.
Unique equalization circuit to contour the restored bass to your speaker system.
Load selection input stage for adapting to factory amplifier outputs.
Provides balanced line level inputs for flexible integration.
Subsonic filter to protect speakers from ultra-low frequencies below 20Hz.
Allows for seamless integration with factory speaker-level outputs.
A feature mentioned in the list of product highlights.
GTO™ Signal Sensing for automatic turn-on.
Describes the physical size and form factor of the device.
Covers warnings about installation, electrical hazards, and safe operation.
Instructions for fuse replacement and protection against high sound pressure levels.
Guidance on responsible disposal and recycling of the electronic apparatus.
Guidance on setting equalizer and other bass controls before activating the device.
Recommends installing the unit in the signal path before crossovers for optimal performance.
Description of line level and speaker level input options.
Explanation of the Bass Level Control functionality via ACR-4.
Details on the Load Select feature for factory amp compatibility.
Explains the patented circuit that reproduces low frequency information using harmonics.
Guidance on selecting a location and securely mounting the Epicenter Micro.
Instructions for connecting power, ground, and remote turn-on wires.
Instructions for mounting the ACR-4 dash control unit.
Details on using the dash bracket for mounting the ACR-4 control.
Steps for flush mounting the ACR-4 dash control for a custom look.
Adjusts the center frequency (27-63 Hz) affected by the ParaBASS equalization.
Controls the shape of the filter centered around the Sweep frequency.
Recommended settings for Voltage Output based on amplifier input and speaker size.
Explanation of the PFM filter and the option to bypass it.
Diagram showing integration with aftermarket head unit and amplifier.
Steps to diagnose and resolve issues where the unit does not power on.
Troubleshooting steps if the bass enhancement effect is not heard.
Guidance on reducing distortion by adjusting controls or settings.
Details the conditions, limitations, and duration of the product warranty.
Technical specifications for input and output levels and impedances.
Key performance indicators including THD, frequency response, and SNR.
Details on power supply, current draw, fuse, weight, and dimensions.
