Need help?Do you have a question about the AUDIOCORE AC830 and is the answer not in the manual?
Defines the TX/RX mode selection switch for transmitter or receiver functionality.
Details the switch for selecting between AUX (3.5mm) and SPDIF (optical) interfaces.
Describes the 3.5mm audio line interface and optical fiber input/output interfaces.
Details the Micro USB charging port and the function of the LED indicator light.
Instructions for charging the AC830 device for the first time before initial use.
Guidance on recharging the device when the battery level is low.
Steps for powering the device on and off, and initiating pairing mode.
Procedures for automatic reconnection and clearing of paired device information.
Explanation of LED light behaviors indicating device status in transmitter mode.
Details on switching interfaces and operating the device while charging.
Steps for powering the device on and off, and initiating pairing mode.
Instructions for play/pause functionality and automatic device reconnection.
Explanation of LED light behaviors indicating device status in receiver mode.
Details on automatic shutdown and switching between AUX and SPDIF interfaces.
Guide for transmitting audio from a TV to Bluetooth headphones or speakers.
Guide for transmitting audio from a computer to Bluetooth headphones or speakers.
Instructions for transmitting audio from other devices using cables.
Connecting two Bluetooth devices simultaneously as a transmitter.
Connecting two mobile phones simultaneously as a receiver.
Tips for faster reconnection with previously paired Bluetooth devices.
Procedure to clear the device's stored pairing history.
General| RF Output Power | 10mW |
|---|---|
| Modulation | FM |
| Frequency Stability | ±0.005% |
| Audio Input | 3.5mm jack |
| Audio Frequency Response | 50Hz-15KHz |
| THD | <0.5% |
| Power Supply | 2 x AA batteries |
| Battery Life | 8 hours |
To Next Page