EasyManuals Logo

AudioEngine A1 User Manual

AudioEngine A1
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background image
Your speakers will sound great out of the box and will get better over time. No need to do anything else but listen to
them, however, we do recommend that you give them at least 40 to 50 hours break-in time before doing any critical
listening.
Cleaning
We don’t recommend using any solvents or cleaners. Just wipe down the cabinets with a soft, dry cloth.
Speaker Placement
Although Audioengine speakers are very forgiving with regards to where you place them, it’s true that proper speaker
location can have an impact on sound quality. Even though there are different theories on correct speaker
placement, rooms and tastes are different so it’s difficult to recommend a perfect setup. We do suggest you feel free
to experiment to see what works for you.
Asa general rule of thumb for the best soundstage and imaging, tweeters should be at about eye-level in your most
frequent listening location.
Here are a few mom suggestions, assuming you have some flexibility regarding placement. No need for concern if
your listening space dictates the speakers position.
Both speakers should be equal distance from your primary listening position. Placing the speakers at least 45 feet
apart usually provides the best imaging and soundstage.
If you need to turn the speakers on their sides, position the tweeters toward the outside.
If used on a desktop for computer or multimedia speakers, the more solid the surface, the better your speakers will
sound!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioEngine A1 and is the answer not in the manual?

AudioEngine A1 Specifications

General IconGeneral
Frequency Response65Hz-22kHz ±2.0dB
Bluetooth CodecsaptX, AAC, SBC
Drivers2.75" aramid fiber woofers, 0.75" silk dome tweeters
Input Impedance10K ohms unbalanced
SNR>95dB (typical A-weighted)
THD+N<0.05% at all power settings
Input Voltage100-240V 50/60Hz auto-switching
Inputs3.5mm stereo mini-jack, Bluetooth
Dimensions6" x 4" x 5.25" (152mm x 102mm x 133mm)
Type2.0 powered speaker system
Crosstalk<50dB
FinishBlack or White
OutputsVariable line-out

Related product manuals