Need help?Do you have a question about the AudioEngine D3 and is the answer not in the manual?
General| Type | USB DAC |
|---|---|
| USB | USB 2.0 |
| Sample Rate | Up to 24-bit/96kHz |
| Bit Depth | 24-bit |
| Output Impedance | 10 Ohms |
| Output Level | 2.0V RMS |
| Supported Sample Rates | 44.1kHz, 48kHz, 88.2kHz, 96kHz |
| Total Harmonic Distortion | < 0.01% |
| SNR | > 100 dB |
| Signal-to-Noise Ratio | >115dB |
| Output | 3.5mm mini-jack |
| Power Requirement | USB powered |
To Next Page
