• Pre-amplifier output
• Loudspeaker output
• Headphone output
• 12V Trigger output
Unpacking the Equipment
The carton should contain:
• The Audiolab 7000A
• One IEC power cord suitable for your area
• One remote handset
• One instruction manual
Please note: The remote control requires 2 x AAA type batteries. Due to international shipping and courier regulations with Lithium-Ion batteries, the remote controller
battery is not included in this package.
Consult the dealer from whom you purchased the equipment if any item is not present. Carefully unpack the unit and accessories. Take care not to damage the surface
finish when undoing the protective polythene sleeve. Retain the packing materials for future use. Retain the user manual and information concerning the date and place of
purchase of your equipment for future reference. If you transfer the unit to a third party, please pass on this instruction manual along with the equipment.
Placement
The unit must be mounted on a solid, level and stable surface.
Before you connect the Audiolab 7000A to the AC mains power, ensure your AC mains voltage corresponds to the rating on the rear panel of the product. If in doubt,
consult your dealer. If you move to an area that has a different mains voltage, seek advice from an Audiolab appointed dealer or a competent service technician.
To Next Page
Loading...
Need help?
General