Verifit
®
User's Guide Version 3.12
November 2015
RECD, audiometric transducer, age, and ABR nHL to eHL conversion factors are encoded. In Insertion gain,
threshold and audiometric transducer type are encoded. The type of data and the ear (left, right or left/right) is
shown below the barcode. Only data for the displayed ear are imported (data for both ears in dual view).
Barcodes may be scanned in any order and it does not matter if the barcode is 'upside down'.
1. Select Speechmap, Viewport or Insertion gain from the Tests menu.
2. Hold the printout so that the barcode is flat. With the scanner 6 – 8 in. (15 – 20 cm) from the barcode, press
the trigger on the scanner and center the illuminated red line along the length of the barcode.
3. When the scan is successful, the scanner will 'beep', the red line will extinguish and a Barcode Entry poster
will appear on the screen. A green checkmark on the poster shows which data have been accepted. A
message will advise if the barcode does not contain data for the screen you are viewing.
4. When all desired data have been accepted, select [Done] to apply the data.
See Barcodes, tabular data, headers and comments on printouts under Printing and Storing Results.
Keypad keys
Keypad Button Function
<Help> Summon context-sensitive Help Screen.
<Setup> Summon Setup Menu containing a list of Verifit features that can be
modified. Any modifications made will be maintained after power off.
<Tests> Summon Test Selection Menu containing a list of the available test
procedures.
<Session> Summon Session Data Menu to erase, export or import data
<Left/Right> Used in the Single View Mode to alternate between ears or A/B Data. Used
in the Dual View Mode to navigate between ears or test panels. Used in
Help to switch between Help index and Help page.
<Print> Print on internal or external printer or print to file.
22
To Next Page
Loading...
