What to do if my AudioSonic Stereo radio receiver has no sound?
If your AudioSonic Stereo radio receiver has no sound or electric power, first, adjust the volume. If that doesn't work, check the power cord connections and the installation and charge of the batteries.
Why does my AudioSonic CD-1572 show no information about the disc?
If your AudioSonic Stereo radio receiver displays no information about the disc, ensure a CD, CD-R, or CD-RW is inserted. If a disc is inserted, it may be scratched or dirty; try replacing or cleaning it. Condensation on the laser lens can also cause this issue, so wait until it disappears. Finally, if using a CD-R, ensure it is finalized.
What to do if AudioSonic CD-1572 CD is not read?
If your AudioSonic Stereo radio receiver's CD is not being read, the CD might be scratched or dirty; try replacing or cleaning it. Alternatively, the laser lens may be covered with condensation; wait until the condensation disappears.
How to fix non-functioning buttons on AudioSonic CD-1572?
If the display unit or buttons on your AudioSonic Stereo radio receiver aren't functioning correctly, electrostatic discharge may be the cause. Turn the unit off, disconnect it, and plug it back in after a few seconds.
How to improve radio reception on AudioSonic Stereo radio receiver?
To improve poor radio reception on your AudioSonic Stereo radio receiver, increase the distance between the unit and your TV or any other home appliance. Also, fully extend the telescopic antenna.
General| Brand | AudioSonic |
|---|---|
| Model | CD-1572 |
| Category | Stereo radio receiver |
| Language | English |
To Next Page