AudioSonic SBB-03005 - Listening Modes; FM Radio Operation; Bluetooth Pairing and Playback

FM Antenna
1. Power ON the unit.
starts blinking. The unit will start to search the next available FM radio station.
The Antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and
extend the wire or relocate the wire to improve the radio reception.
BLUETOOTH PARING AND PLAYBACK
1. Power ON the unit.
3. Power on the external BT Device and enter to searching mode.Start
to the user's manual of your BT Device. )
Notes:
When the external BT Device searched the unit, our model number
will appear on the display of the external BT Device.
Pairing code "0000" may need to be entered.
Normal operation after paired:
1. Turn on the BT function of the external BT Device.
2. Power ON the unit.
4. Wait a few seconds until the unit is paired to the external BT Device automatically.
5. Play the music in the connected BT Device.
6. During playback:
--Press the / TUNE - or /TUNE + buttons to skip tracks.
pairing as the on screen
instructions on the external BT Player. After paired,
the Indicator will stop blinking.
( For details pairing procedures, please refer
3. Press the FM SCAN button on the unit to auto search and play the next availble FM station.
Repeat the same procedures until the desired radio station is searched and play. Or
5. For fine tune, press and release the /TUNE - or /TUNE + buttons repeatedly.
Note: When a FM stereo station was searched, the unit will play in stereo mode automatically.
4. Press and hold the /TUNE - or / TUNE + buttons on the remote control until the indicator
2. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control
repeatedly until the color of Indicator turns to Blue and blink.
~
~
3. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control
repeatedly until the color of Indicator turns to Blue.
2. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control
repeatedly until the color of Indicator turns to Green.
LISTEN TO FM RADIO
First time pairing or re-pairing with an external device:
"SBB03005"
10
6. If the available FM station is stereo, the unit will play in stereo mode automatically.
If the reception is bad, press the MO/ST button on remote control to switch to mono mode.
Press again to resume stereo mode.
4. Press the PAIR button on remote control to cut off the current connection, and try to pair with
other device by the above steps.
--Press the button to pause, press again to resume normal playing.