Need help?Do you have a question about the Audiotec Fischer DIRECTOR and is the answer not in the manual?
General| Brand | Audiotec Fischer |
|---|---|
| Model | DIRECTOR |
| Category | Remote Control |
| Language | English |
Provides instructions for safely and correctly installing the DIRECTOR unit in a vehicle.
Covers basic operational information and interface navigation for the DIRECTOR.
Explains how to operate the DIRECTOR using its touchscreen and control dial.
Details how to assign functions to the four configurable soft key buttons for quick access.
Describes the automatic connection establishment between the DIRECTOR and the DSP upon system startup.
Explains the necessary steps to activate or register the DIRECTOR for full control via the DSP.
Describes how to control Master, Subwoofer, HEC/MEC/AUX, and Digital volumes using the control dial.
Explains how to select and manage saved sound setups directly from the DIRECTOR.
Details how to choose between different audio input sources like Main, HEC/Aux, and Digital Optical.
Covers connecting, pairing, and disconnecting Bluetooth devices for audio streaming.
Enables playback control (play/pause, skip) and volume adjustment for connected Bluetooth devices.
Allows adjustment of bass/treble levels and crossover frequencies for audio tuning.
Displays the supply voltage and temperature of the connected device.
Deactivates MATCH Sound Upgrade features for demonstration purposes.
Covers options for display rotation, backlight modes, and screensaver settings.
Enables rotating the display by 180° to position the control dial on either side.
Configures backlight behavior: auto dimming, permanent dim, or full brightness with timeout options.
Allows adjustment of dim and timeout brightness levels for the display.
Activates a screensaver that changes the display to the Voltage Monitor screen after a set idle time.
Includes settings for startup volume, knob sensitivity, Mute/ATT, and auto source selection.
Configures a power-up volume limiter for selected audio sources.
Adjusts the control dial sensitivity specifically for changing sound setups.
Enables automatic standby mode for the DIRECTOR based on the DSP's power save status.
Allows switching between Mute and Attenuation functions with adjustable levels.
Automatically selects the input source based on the active volume page.
Provides access to system information, reset options, and firmware updates.
Restores the DIRECTOR's settings and sound setups to their factory default values.
Displays current firmware versions, connected product details, and hardware information.
Initiates the firmware update process for the DIRECTOR using the dedicated updater software.
Allows customization of the user interface through font and screen design options.
Allows customization of the font style and size for the DIRECTOR's display.
Enables changing the background color of the DIRECTOR's user interface.
Provides access to unassigned soft keys and their available functions.
Troubleshooting steps for when the DIRECTOR fails to establish a connection with the DSP.
Addresses issues related to the DIRECTOR not powering on, checking power and connections.
Troubleshoots why the DIRECTOR might enter Demo Mode despite a proper DSP connection.
Guides on resolving audio issues after connecting the DIRECTOR, checking volume, mute, and inputs.
Solutions for problems establishing communication with the DSP or software incompatibility.
Steps to recover from update failures where the screen remains black.
Troubleshooting communication issues between the DIRECTOR and the DSP PC-Tool software.
To Next Page
