- 3 -
Power cord Connection
1. Make sure that all the components and speakers are connected correctly.
2. Check that the rated voltage of your unit matches your local voltage.
Caution
To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
Caution
Be sure the AC power cord is disconnected and all functions are off before making connections.
When you are not going to use the unit for a long period of time, disconnect the AC power cord.
SYSTEM CONNECTIONS
To external
Source
AC cord to an AC outlet
Connection with other optional equipment
To listen to or record audio signals from external units through this unit:
Connect the white plug to the white (L) jack, and the red plug to the red (R) jack to the AUX IN connector.
Listening to the connected equipment
1. Press the FUNCTION button to AUX.
2. Play the external source.
Note : If the external equipment is a television and this audio system is close to it, you may experience
interference if the tuner function is selected while the television is working.
To turn on the unit
Press the POWER/STANDBY button. The display will light up. Select the desired function and the corresponding
function indicator will light up.
After use
Press the POWER/STANDBY button. The display will fade and only the clock display will be shown.
L
R
AUX
IN
To Next Page
Loading...