14
Figure 22. Loading Factory Setting
NOTE: The Default Password is 3308. This password is
always effective even after you have selected your own
password and changed it. To avoid the possibility of others
using the default password to set the parental level and change
the password, you can record this default password in another
area and delete it from this manual. Some discs can be limited
depending on the age of users while some discs cannot.
e. Select ‘DEFAULTS’ using the UP or DOWN buttons, then press
RIGHT to enter the submenu. Press ENTER to make the setting
return to the factory-set mode.
NOTE: The parental setting is not affected by the default reset
function.
To Next Page
Loading...
Need help?
General
