E
4
ACCESSORIES
Please check and identify the supplied accessories.
AC Adapter.......................................................................................................... x 1
Remote Control (with Battery)................................................................................. x 1
USING THE REMOTE CONTROL
USING THE REMOTE CONTROL
• This remote control is magnetic and can be
attached to most refrigerators. Some
refrigerator panels are not metallic. In this
case, try attaching the magnetic remote control
to the side of the refrigerator.
• Point the remote control at the remote sensor
located on the unit.
• When there is a strong ambient light source,
the performance of the infrared remote sensor
may be degraded, causing unreliable
operation.
• The recommended effective distance for
remote operation is about 16 feet (5 meters).
TO INSTALL BATTERIES
1. Open the battery door.
2. Insert 2 “AAA” batteries.
BATTERY REPLACEMENT
When the batteries become weak, the operating
distance of the remote control is greatly reduced
and you will need to replace the batteries.
+
_
+
_
CAUTION: Danger of explosion if battery is
incorrectly replace. Replaced only with the
same or equivalent type.
NOTES
• Do not place the remote control near
magnetic devices.
• If the remote control is not going to be used
for a long time, remove the batteries to avoid
damage caused by battery leakage corrosion.
• Do not mix old and new batteries, Do not mix
ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they
become weak.
• Weak batteries can leak and severely damage
the remote control.
• WARNING : Do not dispose of batteries in a
fire. Batteries may explode or leak.
To Next Page
Loading...
