Audiovox Prestige 105BP User Manual

128-8777
1 of 8
1
1
2
1
3
3
*4
*5
BUTTON
RECEIVER
CHANNEL
SYSTEM FUNCTION
Lock And Arm Alarm, also initiate and
terminates *Panic
Unlock And Disarm, also initiates and
terminates *Panic. Programmable to
unlock drivers door and or all doors.
Lock and arm/unlock and disarm. May
be programmed to unlock driver's door
or all doors. Also will initiate and
terminate *Panic.
Pulsed or switched output to control
Remote Trunk Release or optional
device connected to channel 3.
When pressed and release two times,
will provide pulsed output or activate the
Remote Start option when installed.
When so equipped, this button can be
used to operate an optional device
connected to channel 4.
When so equipped, this button can be
used to operate an optional device
connected to channel 5.
These transmitters make use of icons (symbols) to identify the reaction
your security system/keyless entry/and or remote start system, where
applicable, will have when any icon (button) is pressed. These
icons are programmed at time of installation to meet the needs of the
individual and to complement the vehicle that the system is installed in.
To replace a transmitter or add transmitters, please follow the
programming instructions listed on the pages of this manual.
Transmitter Programming Guide
* Where So Equipped
Model 105BP

Audiovox Prestige 105BP Specifications

General

Brand	Audiovox
Model	Prestige 105BP
Category	Transmitter
Language	English

Summary

Transmitter Functionality Overview

Understanding Transmitter Icons

Explains the purpose of transmitter icons and the need for custom programming.

Button Functions and Channels

Details the system function associated with each transmitter button and its receiver channel.

Transmitter Programming

Programming Notes and Precautions

Key considerations for transmitter programming, including timing and system feedback.

Programming Channels 1-5

Detailed steps for programming transmitter functions for channels 1 through 5.

Programming Channels 6-7

Instructions for programming optional outputs or driver priority for channels 6 and 7.

Transmitter Management

Erasing Lost or Stolen Transmitters

Procedure to remove programming for lost or stolen transmitters from the system.

Reprogramming Transmitter Functions

Methods to change or reassign a transmitter button's programmed function.

Transmitter Maintenance

Battery Replacement Procedure

Step-by-step guide for replacing the transmitter's coin cell battery.