Audiovox Pursuit PRO 2032

To Next Page

128-6132

1 OF 8

Congratulations on your purchase of the PRO 2032 automotive Keyless Entry

Upgrade Alarm System. This system is a state-of-the-art auto security system that

is designed to automatically arm and disarm when it receives a command from your

existing Factory Keyless Entry Transmitter. Taking a few moments to read this

manual will help to ensure that your vehicle is protected at all times.

NOTE: This unit has the capability to operate an optional siren, the vehicle horn, or

both. Where referenced (the siren will chirp) the siren may chirp, the horn

may beep or both may occur.

ARMING THE SYSTEM: ( ACTIVE )

1. Turn the ignition key off, exit the vehicle and close all doors.

2. Press and release the Lock button on the keychain transmitter.

3. The siren will chirp one time, the parking lamps will flash one time, and the red

dash mounted LED will begin to slowly flash, indicating that the system is

ARMED.

NOTE: If the unit beeps three times when arming, then one of the entry points

(hood, trunk, or doors) has been left opened. Closing the hood, trunk, or

door will correct the problem and the system will emit a single chirp to

confirm that the problem has been corrected. Additionally, if illuminated

entry is a feature of the Factory Keyless Entry system, the alarm may chirp

3 times every time the system is armed and chirp one additional time

when the interior light turns off to confirm that all trigger zones are fully

operational.

Any time the door lock switch in the vehicle is used to lock the doors while the

ignition key is turned off, the system will immediately arm. To lock the doors after

entering the vehicle,

make sure the ignition key is switched on first. Turning the

ignition key on first will stop the system from arming.

ARMING THE SYSTEM: ( PASSIVE )

1. Turn the ignition key off, exit the vehicle, and close all doors.

2. The dash mounted LED will begin to flash rapidly, indicating that the system is

automatically ( passively ) arming. As an added convenience, the 30 second

automatic passive arming will not begin until all doors are closed, allowing

passengers to exit the vehicle at their convenience.

Model PRO 2032

OWNER’S MANUAL

KEYLESS ENTRY ALARM UPGRADE MODULE

Released 7-23-01.

Main Page

Need help?

Do you have a question about the Audiovox Pursuit PRO 2032 and is the answer not in the manual?

Summary

Keyless Entry Arming and Disarming

Active Arming Procedure

Steps to manually arm the system using the keychain transmitter, including confirmation signals.

Passive Arming Procedure

Explains the automatic arming feature that activates 30 seconds after doors are closed.

Disarming the System

Instructions for deactivating the alarm using the unlock button on the keychain transmitter.

System Protection and Disarming Features

Protection While System is Armed

Details on how the system reacts to intrusion attempts, siren/light operation, and starter disable.

Intrusion Warnings and Special Modes

Intrusion Warning Signals

How the system indicates past intrusion attempts via LED flashes and chirp patterns.

Emergency Panic Operation

Procedure to activate the alarm manually for emergency situations using the transmitter.

Valet Mode Operation

How to temporarily bypass all alarm functions for service or parking attendants.

System Override and Custom Code Programming

Manual Override with Valet Switch

Steps to disarm the system without the transmitter using the valet pushbutton switch.

Custom Code Manual Override Programming

Guide to programming a personal override code for enhanced security and system access.

Manual Override and System Access

Manual Override with Custom Code

Procedure to disarm the system using the programmed custom code when transmitter is unavailable.

Additional System Features and Settings

Optional Accessory Control

How to activate optional accessories like remote start or window closure via transmitter.

Optional Auto Lock;Unlock Feature

Activating automatic door locking and unlocking based on ignition status.

Eliminating Arm;Disarm Chirps

Instructions on how to disable or enable audible arming/disarming confirmation chirps.

System Functions Overview

Dash LED Indicator Meanings

Summary of what different dash LED flashing patterns indicate for system status.

Chirp Indicator Meanings

Summary of what different siren/horn chirps signify for system operations.

Parking Light Indicator Meanings

Summary of what parking light flashes signify for system status.